Posted byOrthoEx Posted in
Posted on Nov 20, 2018

November 20, 2018

LYON, France & NEW YORK–(BUSINESS WIRE)–The MEDICREA® Group (Euronext Growth Paris: FR0004178572-ALMED ; OTCQX Best Market – MRNTY & MRNTF), pioneering the digital transformation of spinal surgery through Artificial Intelligence, predictive modeling and patient specific implants with its UNiD ASI™ (Adaptive Spine Intelligence) proprietary software platform, services and technologies, announced today that the 3,000th surgery utilizing MEDICREA®’s patient-specific UNiD ASI™ technology has been successfully completed.

Five years after its initial launch, over 3,000 patients worldwide have benefited from UNiD ASI™, the 100% proprietary, pre-operative planning technologies and services associated with patient-specific spinal realignment rods. This technology has seen a strong acceleration in adoption rate in 2018 especially in the USA (+62% cases in the USA since January 1st, 2018). MEDICREA® just recorded its highest monthly number of UNiD® surgeries with 121 surgeries performed in October 2018.

“Planning a case is a crucial step in any spine surgery. The slightest change at the base of the spine impacts the top of the spine greatly. Therefore, if the base is not fixed properly, the patient has a higher risk of proximal junctional kyphosis (PJK). With MEDICREA®’s proprietary UNiD ASI™ platform, I can plan my case pre-operatively. The Artificial Intelligence embedded within the platform allows me to visualize the compensatory mechanisms above and below the instrumented spine that will most likely occur based on my surgical plan. I can work hand-in-hand with the UNiD Lab™ biomedical engineers who create several surgical plans and identify the one that would give my patient the best outcome” said Christopher Kleck, MD, Department of Orthopedics, University of Colorado SOM, Aurora, CO.

Christopher Kleck, MD, recently co-authored the article titled: “Pelvic Incidence Changes Between Flexion and Extension”. Recent evidence suggests that Pelvic Incidence (PI) changes with age, ethnicity, and body mass index and can be modified following spinal procedures. However, the mechanism of PI changes is still not well understood. “This new study suggests that this mechanism is even more complex than previously thought and reinforces the need for UNiD ASI™ technology” adds C. Kleck, MD.

MEDICREA®’s proprietary UNiD ASI™ technology is a comprehensive suite of services designed to help surgeons improve their patient’s outcomes. By leveraging artificial intelligence and the latest clinical research, the UNiD LAB™ Engineer provides the surgeon with insights previously not possible within their clinic. UNiD ASI™’s unique blend of software and services delivers these insights within the normal pace of a surgeon’s clinic day without slowing them down. This empowering technology allows surgeons to have more impactful patient interactions with visual surgical plans based on technology fueled by 3,000 past cases.

Dr Christopher Ames, MD, Director of spinal tumor and spinal deformity surgery at UCSF Medical Center, CA, said “I fully integrated the UNiD ASI™ technology within my practice workflow. Before I even see the patient, I can look at the images and the measurements taken by the UNiD LAB™ biomechanical engineers. For instance, in a patient who has sagittal imbalance and pelvic retroversion I can tell that I am going to need a PSO. I can directly communicate with an engineer to let them know. Within minutes, they will simulate different plans incorporating my feedback. I can review the pre-op measurements sent back to me and decide on the patient’s final operative plan. From there, I can meet the patient, explain the procedure and schedule the surgery. Instead of adding more time, my clinic became much more efficient.”

Denys Sournac, Chief Executive Officer of MEDICREA®, stated, “Spine surgery is one of the more complex procedures in healthcare because of the high number of different parameters to take into consideration. It is impossible for the human brain to compute all of them for one single patient. MEDICREA® has dedicated the past 8 years to creating and strengthening a platform based on Artificial Intelligence with the goal to assist surgeons in building precise surgical planning in order to help them improve their patient’s outcomes.”

Denys Sournac adds: “Today we are celebrating the 3,000th surgery with the UNiD ASI™ technology, including patient-specific implants. This milestone embodies the power of our platform and the depth of our clinical database collected following rigorous and centralized processes. Clinical data from which our algorithms are designed and continuously refined are extremely homogeneous and exceptionally rich.”

“The spine industry is starting its digital revolution, and we are proud to be leading the way” concluded Denys Sournac.

Click here to reach the article: Pelvic Incidence Changes Between Flexion and Extension

Click here to reach the video: UCSF Clinical Application: Live Pre-Op Planning with Adaptative Spine Intelligence


Through the lens of predictive medicine, MEDICREA® leverages its proprietary software analysis tools with big data and machine learning technologies supported by an expansive collection of clinical and scientific data. The Company is well-placed to streamline the efficiency of spinal care, reduce procedural complications and limit time spent in the operating room.

Operating in a $10 billion marketplace, MEDICREA® is a Small and Medium sized Enterprise (SME) with 210 employees worldwide, which includes 50 who are based in the U.S. The Company has an ultra-modern manufacturing facility in Lyon, France housing the development and production of 3D- printed titanium patient-specific implants.

For further information, please visit:

Connect with MEDICREA®


MEDICREA® is listed on

EURONEXT Growth Paris

ISIN: FR 0004178572

Ticker: ALMED


MEDICREA® is traded on

OTCQX Best Market

Tickers: MRNTY & MRNTF


Founder, Chairman and CEO
Chief Financial Officer
Tel: +33 (0)4 72 01 87 87